Netgear XSM4348CS User Manual - Page 60

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 17. Current IPv6 Management Interface Status Field MAC Address IPv6 Enable Mode IPv6 Routing Mode Stateless Address Autoconfig Mode DHCPv6 Client Mode IPv6 Default Gateway IPv6 Next Hop Interface Prefix Length EU164 Current State Description The MAC address assigned to the management interface. Indicates whether IPv6 Enable Mode on the management interface is enabled or disabled. Indicates whether IPv6 Routing Mode on the management interface is enabled or disabled. Indicates whether the IP address autoconfiguration mode on the management interface is enabled or disabled. The Address DHCP mode on the management interface. The IPv6 default gateway of the switch. The IPv6 next hop interface of the switch. The prefix length on the management interface. The EUI-64 flag of the IPv6 address on the management interface. The current state of the IPv6 address on the management interface. Configure an IPv4 Management Interface Use this page for port-based IP management for IPv4. To configure an IPv4 management interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Management Interfaces > IPv4 Management Interface Configuration. Configure System Information 60 User Manual