Netgear XSM4348CS User Manual - Page 178
Table 64., NSF Summary, Field, Description, Power On, Cold Admin Move, Auto Warm, Auto Cold
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the nonconfigurable NSF Summary data that is displayed. Table 64. NSF Summary Field Description Operational Status Indicates whether NSF is enabled on the chassis. NSF is enabled by default. Last Startup Reason The type of activation that caused the software to start the last time. The possible values are as follows: • Power On. The switch is rebooted. A power cycle or an administrative reload command might caused this • Cold Admin Move. The system resets all hardware tables without a reboot and the application begins from a pre-initialized state, but no data is retained from before the failover. • Warm Admin Move. The administrator issued a command for the standby manager to take over. • Auto Warm. The primary management card restarted due to a failure, and the system executed a nonstop forwarding failover. • Auto Cold. The system switched from the active manager to the backup manager and could not maintain user data traffic. This is usually caused by multiple failures occurring close together. Time Since Last Restart Time since the current management card because the active management card. For the backup manager, the value is set to 0d:00:00:00. Restart In Progress Indicates whether a restart is in progress. A restart is not considered complete until all hardware tables are fully reconciled. Warm Restart Ready Indicates whether the initial full checkpoint finished. Copy of Running Configuration to Backup Unit Status Status of copying the running configuration to backup blades. Backup Configuration Age Indicates the time since the running configuration was last copied to the backup blade. Time Until Next Backup Indicates the number of seconds until the running configuration is copied to the backup blade. NSF Support on Unit Unit ID The slot number for the blade. NSF Support Displays whether the switch supports the nonstop forwarding (NSF) feature. Manage Stacking 178 User Manual