Netgear XSM4348CS User Manual - Page 645

M4300 Intelligent Edge Series Fully Managed Stackable Switches The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Logs > Buffered Logs. 5. To clear the buffered log from the memory, click the Clear button. Configure the Memory Log Settings This log stores messages in memory based upon the settings for message component and severity. To configure the memory log settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Logs > Memory Log. Monitor the Switch and Network 645 User Manual