Netgear XSM4348CS User Manual - Page 198

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure a Voice VLAN You can configure the parameters for voice VLAN configuration. Only users with read/write access privileges can change the data on this page. To configure a voice VLAN: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> VLAN > Advanced > Voice VLAN Configuration. 5. Select the Admin Mode Disable or Enable radio button. This specifies the administrative mode for voice VLAN for the switch. The default is Disable. 6. Use Interface to select the physical interface. 7. Use Interface Mode to select the voice VLAN mode for selected interface: • Disable. This is the default value. • None. Allow the IP phone to use its own configuration to send untagged voice traffic. • VLAN ID. Configure the phone to send tagged voice traffic. • dot1p. Configure voice VLAN 802.1p priority tagging for voice traffic. When this is selected, enter the dot1p value in the Value field. • Untagged. Configure the phone to send untagged voice traffic. 8. Use Value to enter the VLAN ID or dot1p value. Configure Switching Information 198 User Manual