Netgear XSM4348CS User Manual - Page 53

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the nonconfigurable fields on the Service Port Configuration page. Table 15. IPv4 Service Port Configuration Field Burned-in MAC Address Interface Status Description The burned-in MAC address used for out-of-band connectivity. Indicates whether the link status is up or down. Configure the IPv6 Service Port You can configure IPv6 network information on the service port. The service port is a dedicated Ethernet port for out-of-band management of the device. Traffic on this port is segregated from operational network traffic on the switch ports and cannot be switched or routed to the operational network. To configure the IPv6 service port: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Management Interfaces > IPv6 Service Port Configuration. Configure System Information 53 User Manual