Netgear XSM4348CS User Manual - Page 609

M4300 Intelligent Edge Series Fully Managed Stackable Switches The System Information page displays. 4. Select Security > ACL > Basic > MAC Binding Configuration. 5. Select a MAC ACL from the ACL ID list. You can select one and bind it to the interfaces. The packet filtering Direction for ACL is Inbound, which means the MAC ACL rules are applied to traffic entering the port. 6. Specify an optional Sequence Number to indicate the order of this access list relative to other access lists already assigned to this interface and direction. A low number indicates high precedence order. If a sequence number is already in use for this interface and direction, the specified access list replaces the currently attached access list using that sequence number. If you do not specify the sequence number, a sequence number that is one greater than the highest sequence number currently in use for this interface and direction is used. The valid range is 1-4294967295. 7. The Port Selection Table provides a list of all available valid interfaces for ACL binding. All nonrouting physical interfaces VLAN interface and interfaces participating in LAGs are listed. • To add the selected ACL to a port or LAG, click the box directly below the port or LAG number so that an X appears in the box. • To remove the selected ACL from a port or LAG, click the box directly below the port or LAG number to clear the selection. An X in the box indicates that the ACL is applied to the interface. 8. Click the Apply button. Your settings are saved. Manage Switch Security 609 User Manual