Netgear XSM4348CS User Manual - Page 582

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. From the VLAN ID menu, select the VLAN from the list for the binding rule. 8. In the IPv6 Address field, specify valid IP address for the binding rule. 9. Click the Add button. The IPv6SG static binding entry is added to the database. The following table describes the nonconfigurable IPv6 Source Guard dynamic binding configuration information that is displayed. Table 211. IPv6 Source Guard Dynamic Binding Configuration Field Interface MAC Address VLAN ID IPv6 Address Filter Type Description The interface to add a binding into the IPSG database. The MAC address for the binding entry. The VLAN for the binding entry. Displays valid IPv6 address for the binding entry. Filter type used on the interface. One is source IPv6 address filter type, and the other is source IPv6 address and MAC address filter type. Configure Dynamic ARP Inspection You can configure dynamic ARP inspection (DAI) VLANs, interfaces, and ACL with associated rules. Configure the Global Dynamic ARP inspection Settings You can configure the global dynamic ARP inspection (DAI) settings. To configure the global DAI settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Control > Dynamic ARP Inspection > DAI Configuration. Manage Switch Security 582 User Manual