Netgear XSM4348CS User Manual - Page 448

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. In the Priority field, enter the priority of C-BSR. 8. Enter the Advertisement Interval value of the C-BSR in seconds. The default value is 60. 9. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 171. Multicast BSR Candidate Configuration Field Description BSR Expiry Time (hh:mm:ss) Time (in hours, minutes and seconds) in which the learned elected bootstrap router (BSR) expires. IP Address The IP address of the elected BSR. Next bootstrap Message (hh:mm:ss) Time (in hours, minutes, and seconds) in which the next bootstrap message is due from this BSR. Next Candidate RP Advertisement Time (in hours, minutes, and seconds) in which the next candidate RP (hh:mm:ss) advertisement is sent. Configure the PIM Static Rendezvous Point You can statically configure the rendezvous point (RP) address for one or more multicast groups. To configure the PIM static RP: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > PIM > Static RP Configuration. Configure Multicast Routing 448 User Manual