Netgear XSM4348CS User Manual - Page 197

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> VLAN > Advanced > Port DVLAN Configuration. 5. Select Interface check boxes to select the physical interface. To select all ports, select the Interface check box at the top of the column. 6. In the Admin Mode field, select Enabled or Disabled. This specifies the administrative mode through which double VLAN ragging can be enabled or disabled. The default value for this is Disabled. 7. In the Global EtherType field, specify the first 16 bits of the DVLAN tag: • 802.1Q Tag. Commonly used tag representing 0x8100 • vMAN Tag. Commonly used tag representing 0x88A8 • Custom Tag. Configure the EtherType in any range from 0 to 65535 8. Click the Apply button. Your settings are saved. Configure Switching Information 197 User Manual