Netgear XSM4348CS User Manual - Page 255

M4300 Intelligent Edge Series Fully Managed Stackable Switches To configure MLD snooping for VLANs automatically: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> Multicast > MLD Snooping > MLD VLAN Configuration. 5. Select the check box for the VLAN ID for which MLD snooping must be enabled. 6. From the MLD Plus Mode menu, select to enable or disable the MLD Plus mode on the VLAN. If enabled, the following MLD snooping modes are automatically enabled for the VLAN: • Admin mode • Fast-Leave • Exclude Mrouter Interface Mode If disabled, these MLD snooping modes are automatically disabled for the VLAN. Note: For information about other settings on the page, see Configure MLD Snooping for VLANs Manually on page 256. 7. Click Add to enable MLD Snooping on the specified VLAN. 8. Click the Apply button. Your settings are saved. Configure Switching Information 255 User Manual