Netgear XSM4348CS User Manual - Page 695

M4300 Intelligent Edge Series Fully Managed Stackable Switches The System Information page displays. 4. Select Maintenance > Troubleshooting > Full Memory Dump. 5. From the Protocol menu, select the protocol used to store the core dump file. Possible values are as follows: • None. Disable core dump. • TFTP. Set TFTP protocol. • NFS. Set NFS protocol. • USB. Set USB protocol. 6. In the File Path field, enter the path to the location to store the core dump file. 7. In the File Name field, enter the core dump file name. 8. Select the Hostname option to append the host name to the core dump file name. 9. Select the Time-stamp option to append a time-stamp to the core dump file name. 10. Select the Switch Register Dump option to dump the switch chip register in case of an exception. 11. Select the Write Core Test option to test the core dump setup. 12. Select the Write Core option to create a core dump and store it to the previously configured external server. Executing this procedure causes a reload of the device. 13. Select the Save Current Settings option to save the current settings of the system. 14. Click the Apply button. The memory dump is sent to the specified location. Maintenance and Troubleshooting 695 User Manual