Netgear XSM4348CS User Manual - Page 153

M4300 Intelligent Edge Series Fully Managed Stackable Switches 8. In the Link Dependency Interface Configuration section of the page, select which interfaces are displayed on the page: • Use LAG to display LAGs only. • Use All to display all physical ports and LAGs. 9. Use one of the following methods to select an interface: • Use the Go To Interface field by entering the interface in unit/slot/port format and click the Go button. The entry corresponding to the specified interface, is selected. • Use Interface to select the interface for which data is to be displayed or configured. 10. In the Downstream Interface field, specify whether the interface belongs to the group's downstream list. An interface that is defined as an upstream interface cannot be defined as a downstream interface in the same link state group. The default value is False. • Select False to delete an interface from the downstream list of the specified group. • Select True to add an interface to the downstream list of the specified group. 11. In the Upstream Interface field, specify whether the interface belongs to the group's upstream list. An interface that is defined as an upstream interface cannot be defined as a downstream interface in the same link state group. The default value is False. • Select False to delete an interface from the upstream list of the specified group. • Select True to add an interface to the upstream list of the specified group. 12. Click the Apply button. Your settings are saved. 13. Click the Refresh button to refresh the page with the latest information on the switch. The following table describes the Link Dependency Interface Configuration nonconfigurable information that displays on the page. Table 53. Link Dependency Interface Configuration Nonconfigurable Field Field Link Status Description Indicates whether the link for the corresponding interface is up or down. The following table describes the Link Dependency Group Statistic nonconfigurable information that displays on the page. Table 54. Link Dependency Group Statistic Field Group ID Link Action Group State Description The Group ID for which data is displayed. The range is 1 to 16. The action to be performed on downstream interfaces when all the interfaces in the upstream list go down. The current state of the group. Configure System Information 153 User Manual