Netgear XSM4348CS User Manual - Page 116

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the Interface with the information to view or configure. You can either: a. In the Go To Interface field, enter the interface in unit/slot/port format and click the Go button. The entry corresponding to the specified interface is selected. b. Select the check box from the list of Interfaces configured for DHCPv6 server functionality. 6. In the Admin mode list, select to Enable or Disable DHCPv6 mode to configure server functionality. DHCPv6 server and DHCPv6 relay functions are mutually exclusive. 7. In the Pool Name field, specify the DHCPv6 pool containing stateless and/or prefix delegation parameters. 8. Rapid Commit is an optional parameter. In the Rapid Commit list, select to Enable or Disable allowing an abbreviated exchange between the client and server. 9. In the Preference field, specify the preference value used by clients to determine the preference between DHCPv6 servers. Valid values are 0 to 4294967295. The default value is 0. 10. Click the Apply button. Your settings are saved. View DHCPv6 Bindings Information You can view entries in the DHCP Bindings table. After a client acquires IPv6 configuration information from the DHCPv6 server, the server adds an entry to its database. The entry is called a binding. To view DHCPv6 bindings information: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Configure System Information 116 User Manual