Netgear XSM4348CS User Manual - Page 630

M4300 Intelligent Edge Series Fully Managed Stackable Switches The System Information page displays. 4. Select Security > ACL > Advanced > Binding Table. 5. To delete an IP ACL-to-interface binding, select the check box next to the interface and click the Delete button. The following table describes the information displayed in the IP ACL Binding Table. Table 220. IP ACL Binding Table Field Interface Direction ACL Type ACL ID/Name Sequence Number Description Displays the selected interface. Displays the selected packet filtering direction for the ACL. The type of ACL assigned to the selected interface and direction. The ACL number (in the case of the IP ACL) or ACL name (in the case of Named IP ACL and IPv6 ACL) identifying the ACL assigned to selected interface and direction. The sequence number signifying the order of the specified ACL relative to other ACLs assigned to selected interface and direction. Configure VLAN ACL Bindings To configure VLAN ACL bindings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > ACL> Advanced > VLAN Binding Table. Manage Switch Security 630 User Manual