Netgear XSM4348CS User Manual - Page 187

M4300 Intelligent Edge Series Fully Managed Stackable Switches 9. Select from the list to configure the Native VLAN ID. This is the native VLAN for the port, and is valid only when the port switchport mode is Trunk. 10. Configure the Trunk Allowed VLANs. This is the set of VLANs of which the port can be a member when configured in Trunk mode. By default, this list contains all possible VLANs, even if they are not yet created. VLAN IDs are in the range 1 to 4093. Use a hyphen (-) to specify a range, or a comma (,) to separate VLAN IDs in a list. Spaces are not permitted. A zero value clears the allowed VLANs. An All value sets all VLANs in the range (1 to 4093). 11. Click the Apply button. Your settings are saved. The Native VLAN Tagging field displays enabled or disabled: • When VLAN tagging is enabled, if the trunk port receives untagged frames, it forwards them on the native VLAN with no VLAN tag. • When VLAN tagging is disabled, if the trunk port receives untagged frames, it includes the native VLAN ID in the VLAN tag when forwarding Configure VLAN Membership To configure VLAN membership: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> VLAN > Advanced > VLAN Membership. Configure Switching Information 187 User Manual