Panasonic AW-UE100 Operating Instructions - Page 117
Streaming format, Common setup, <NOTE>, Mode [Client, Listener], Factory settings
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Web screen configurations (continued) Streaming format Make settings for H.264 images for use in RTMP/RTMPS transmission. The setting is confirmed with the [Set] button. Refer to the explanation for H.264 (→ page 113) for information about Image capture size, Frame rate and Max bit rate(per client). zzSRT Make SRT transmission settings. • When starting SRT transmissions in the [Listener] mode, set the decoder and application to [Client] mode and set the following URL: srt://[unit's IP address]:[value set in Client port] • When performing SRT transmissions in the [Client] mode, set the IP address and port number of the decoder and application to [Destination IP address] and [Destination port], and then click the [start] button for [Live Streaming] in the live screen [Live]. Common setup The setting is confirmed with the [Set] button. • Streaming format settings cannot be changed during RTMP/RTMPS transmissions. • Set the Streaming format to the settings recommended for the transmission destination server. Visit the publisher's website or contact them about the recommended values. • When [IP(UDP)] of [Tracking Data Output] is set to [On], video transmission via IP may be delayed or the video may suffer frame loss. (→ page 136) We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off] during RTMP/RTMPS transmission. Mode [Client, Listener] Selects the method to connect to the SRT compatible decoder or service. Client Specify the transmission destination IP address and port number when starting transmission from this unit. Listener Specify the listener port when awaiting the external request to start transmission. Factory settings: Listener Destination IP address When [Client] is set in [Mode], enter the IP address. Images and audio will be sent to the specified IP address. • Only IPv4 can be set as the IP address. Destination port When [Client] is set in [Mode], enter the port number (used when transmitting images from this unit). Connection is to the specified port number. Client port When [Listener] is set in [Mode], enter the port number (used when this unit is waiting for a connection). The following port numbers are used by the unit so they cannot be used. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 546, 547, 554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900, 59000 to 61000 117