Panasonic AW-UE100 Operating Instructions - Page 79

Camera menu items (continued) „„The relationships between the various setting values when [Preset Acceleration] is set to [Manual] during preset playback zzWhen [Preset Speed Unit] is [Speed Table] It is possible to specify the responsiveness (maximum speed, acceleration rate, S-curve steps) for operation. • When the amount of movement specified by the preset is small, there may be cases when the specified speed is not reached. • Restrictions are automatically placed on the acceleration rate to prioritize the specified speed. (The lower limit of the acceleration rate is automatically restricted by the specified speed.) • To enable the pan and tilt operations to occur simultaneously, the maximum speed of the axis with a smaller amount of movement is automatically restricted. Acceleration range Range during which the speed reaches the maximum according to that specified by preset operation of pan/tilt Deceleration range Operation speed [Rise S-Curve] 0 to 30 [Fall S-Curve] 0 to 30 The larger that the value of the S-curve is, the greater the speed changes when accelerating or decelerating (represented by the dotted line rather than the solid line), and the operational feel of acceleration and deceleration changes. There is no change in the time taken for accelerating or decelerating with the S-curve setting. Maximum speed reached (Speed specified with [Preset Speed]) Acceleration time The time taken to move to the destination from when the preset is started Deceleration time [Rise Acceleration] 1 to 255 The larger the value, the shorter the acceleration time (It takes less time to reach the speed specified with preset pan/tilt operation) [Fall Acceleration] 1 to 255 The larger the value, the shorter the deceleration time (It takes less time to reach the deceleration or stopped status specified with preset pan/tilt operation) 79