Panasonic AW-UE100 Operating Instructions - Page 175
AC adaptor, Specifications continued, Pan‑tilt head unit]
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Specifications (continued) Electronic shutter speed: • 59.94p/59.94i mode 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 • 29.97p mode 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 • 23.98p/24p mode 1/24, 1/48, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 • 50p/50i mode 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 • 25p mode 1/25, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 Synchro scan: • 59.94p/59.94i mode 60.00 Hz to 7200 Hz • 29.97p mode 30.00 Hz to 7200 Hz • 23.98p/24p mode 24.00 Hz to 7200 Hz • 50p/50i mode 50.00 Hz to 7200 Hz • 25p mode 25.00 Hz to 7200 Hz Gamma: HD/FILMLIKE1/FILMLIKE2/FILMLIKE3 White balance: ATW, 3200K, 5600K AWB: AWB-A/AWB-B VAR (selectable between 2000K and 15000K by designating a value) Chroma amount variability: OFF, -99% to 99% Scene file: Scene1, Scene2, Scene3, Scene4 Output format SDI output: [4K format] 2160/59.94p, 2160/50p, 2160/29.97p*1 , 2160/25p*1 , 2160/24p*1 , 2160/23.98p*1 [HD format] 1080/59.94p, 1080/50p, 1080/29.97p*1 , 1080/29.97PsF, 1080/25p*1 , 1080/25PsF, 1080/23.98p*2 , 1080/24p*1 , 1080/23.98p*1 , 1080/23.98PsF, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p HDMI output: [4K format] 2160/59.94p, 2160/50p, 2160/29.97p*1 , 2160/25p*1 , 2160/24p*1 , 2160/23.98p*1 [HD format] 1080/59.94p, 1080/50p, 1080/29.97p*1 , 1080/25p*1 , 1080/23.98p*3 , 1080/24p*1 , 1080/23.98p*1 , 1080/59.94i, 1080/50i, 720/59.94p, 720/50p *1 Native output *2 OVER 59.94i output (your monitor may recognize the signal as 59.94i). *3 OVER 59.94p output (your monitor may recognize the signal as 59.94p). Synchronization system: Internal/External synchronization (BBS/Tri-level sync) [Pan-tilt head unit] Installation method: Stand-alone (Desktop) or suspended (Hanging) • To ensure safety, the unit must be secured using the mount bracket supplied. Camera/pan-tilt head control: IP connecting cable • When connecting through a PoE++ hub LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft) • When a PoE++ hub is not used LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft) AW protocol LAN cable*4 (category 5e or above, straight connecting cable cable), max. 1000 m (3280 ft) *4 Use of an STP (shielded twisted pair) cable is recommended. Pan/tilt operation speed: Speed range: 0.08°/s to 60°/s (Normal mode) * 3 speed modes installed Normal: 60°/s, Fast1: 90°/s, Fast2: 180°/s • Note that the operating noise may be loud in high speed. • If the operating noise is disturbing, use the Normal mode. Panning range: ±175° Tilting range: -30° to 210° • Depending on the pan or tilt position, the camera may be reflected in the image. Quietness: NC35 or less AC adaptor Input: 100 V to 240 V AC ( ), 50/60 Hz, 1.2 A Output: 12 V DC ( ), 3.0 A, 36 W indicates safety information. Inrush current, measured according to European standard EN55103-1, on initial switch-on: 4.5 A, after a supply interruption of 5 s: 16 A 175