Panasonic AW-UE100 Operating Instructions - Page 76

Camera menu items (continued) Preset 1/2 screen Preset 1/2 Preset Speed Unit Speed Table Preset Speed Table Fast Preset Speed 20 Preset Acceleration Setting Preset Scope Mode A Preset Digital Extender Off Preset Crop Off Preset Thumbnail Update On Preset Name Reset Return Preset Speed Unit [Speed Table, Time] When reproducing the information such as camera direction registered in the preset memory, you can select whether to specify the playback time by speed or by time. Speed Table Specify the speed when playing during preset playback. Time Specify the time when playing during preset playback. Preset Speed Table [Slow, Fast] Set the preset speed table (Slow, Fast). During preset playback, presets are performed at [Preset Speed] (1 to 30) values that are based on the table set here. This is only enabled when [Preset Speed Unit] is set to [Speed Table]. Preset Speed [1 to 30/1s to 99s] When [Preset Speed Unit] is [Speed Table]: [1 to 30] Set the pan/tilt operation speed in 30 steps when playing back the preset memory. • When you set large [Preset Speed] values, the image may sway when the movement stops. When [Preset Speed Unit] is [Time]: [1s to 99s] Set the pan/tilt operation time between 1 and 99 seconds when playing back the preset memory. • Depending on the movement distance of pan/tilt, there may be a difference compared to the specified time. Preset Acceleration Setting Displays the advanced setting screen for setting acceleration speed when starting/stopping preset playback. (→ page 78) Preset Scope [Mode A, Mode B, Mode C] Selected here are the setting items to be recalled when the contents of the preset memory are regenerated. Mode A Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, white balance adjustment value Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris Mode C Pan, Tilt, Zoom (including digital zoom), Focus Preset Digital Extender [Off, On] Turns the preset digital extender function off/on. When set to [On], the digital extender function configuration will be recalled when regenerating the preset memory. When set to [Off], the digital extender function configuration will not be recalled when storing the preset memory. Preset Crop [Off, On] When the preset memory is played back, set whether the reproduction of content set in the various [UHD Crop] menus is off/on. When set to [On], the content set in the various [UHD Crop] menus is reproduced when preset memory is played back. When set to [Off], the content set in the various [UHD Crop] menus is not reproduced when preset memory is played back, with the current values being kept. • This is enabled only when [Format] in [System 1/2] screen is the following. 2160/59.94p, 2160/29.97p 2160/50p, 2160/25p 2160/24p, 2160/23.98p • This is only enabled when [UHD Crop] is set to [Crop(1080)] or [Crop(720)]. • When [UHD Crop] is [Off] or [Crop(1080)] and preset memory is registered and preset playback is executed when [UHD Crop] is [Crop(720)], then, even if [Preset Crop] is [On], the content set in each menu of [UHD Crop] is not recalled. • When [UHD Crop] is [Crop(720)] and preset memory is registered and preset playback is executed when [UHD Crop] is [Crop(1080)], then, even if [Preset Crop] is [On], the content set in each menu of [UHD Crop] is not recalled. Preset Thumbnail Update [Off, On] Turn off/on the function for registering the still image (thumbnail) for the images being output when a preset memory is registered. When set to [On], the still image (thumbnail) for the images being output is registered when registering a preset memory. When set to [Off], the still image (thumbnail) for the images being output is not registered when registering a preset memory, but rather the still image (thumbnail) previously registered is maintained. • When [IP/HDI|HX] of [OSD Mix/Crop Marker] is [On], the character strings of OSD menu displayed during the generation of still images (thumbnails) and crop frames are imported to the thumbnails. • When [UHD Crop] is [Crop(1080)] or [Crop(720)], the still image for the images (Full or Crop) specified in [IP Out1] on [UHD Crop 1/2] screen is registered. • When uploading Camera(ALL), Camera(SYSTEM) or Camera(PRESET) on the web screen or other access, the still image (thumbnail) that has been registered in preset memory will be erased. (→ page 157) 76