Panasonic AW-UE100 Operating Instructions - Page 32
Network Settings, Network settings continued
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Network settings (continued) Network Settings 1. Start the Easy IP Setup Software Version.2. 2. Click the [Search] button. Automatically assigning IP addresses 1. Start the Easy IP Setup Software Version.2. 2. Click the [Auto IP] button. 3. Click the camera to be set, and click the [Network Settings] button. • When a DHCP server is being used, the IP address allocated to the unit can be checked by clicking the [Search] button of the Easy IP Setup Software Version.2. • If the same IP address is used for any additional cameras, the numbers of the additional cameras will be displayed in the [IPv4 overlap] column of the cameras concerned. • When the [Access Camera] button is clicked, the Live screen of the selected camera is displayed. • This unit supports an IPv4/IPv6 switching function. 4. Input the network items, and click the [OK] button. • Care must be taken when this function is used because network settings made manually are overwritten as the IP addresses for the remote cameras connected within the same network are automatically assigned. Updating the firmware 1. Start the Easy IP Setup Software Version.2. 2. Click the [FW Update] button. 3. From the displayed list, select the terminal for which you want to update the firmware, then press the [OK] button. Registering user accounts 1. Start the Easy IP Setup Software Version.2. 2. Click the [Initial Account] button. 3. Select the camera for which you want to register a user, enter the account name and password, and then press the [OK] button. Selecting the network interface 1. Start the Easy IP Setup Software Version.2. 2. From the Network Adaptor pull-down menu, select the network adaptor that will detect the camera. 32