Panasonic AW-UE100 Operating Instructions - Page 82

Camera menu items (continued) Firmware Version 2/2 screen Firmware Version 2/2 EEPROM Main/Network FPGA Network Enc R5T R5R Logic Return V01.00 V01.00 V01.00 V01.00 V01.00 V01.00 EEPROM Main/Network Display the EEPROM version of the main/network. FPGA Network Displays the version of the Network module. Enc Displays the version of the image compression module. R5T Displays the version of the video signal control module (at the front). R5R Displays the version of the video signal control module (at the back). Logic Displays the version of the main functional part of FPGA. Return Return to the previous menu level. IP Network screen IP Network IP Address Subnet Mask Default Gateway Set Execute Return 192.168.0.10 255.255.255.0 192.168.0.1 IP Address Set the IP address for this unit. The set value is applied to this unit when [Set Execute] is executed. Subnet Mask Set the subnet mask for this unit. The set value is applied to this unit when [Set Execute] is executed. Default Gateway Set the default gateway for this unit. The set value is applied to this unit when [Set Execute] is executed. Set Execute Apply the values set in [IP Address], [Subnet Mask], and [Default Gateway] to this unit. Return Return to the previous menu level. • The IP Network cannot be changed while the DHCP function is On. • If the DHCP function is not to be used, change the setting for [DHCP] to [Off] in the network settings screen of your web browser. (→ page 141) 82