Panasonic AW-UE100 Operating Instructions - Page 45

Black balance adjustment Adjust the zero levels of the three primary colors (RGB) to reproduce black accurately. If the black balance is out of adjustment, not only will black be reproduced poorly, but the color tones of the screen as a whole will also be degraded. Readjustment of the black balance is not required under normal circumstances but is necessary in the following situations. • Perform adjustment when using the unit for the first time or when the unit has not been used for a prolonged period. • Perform adjustment when the ambient temperature changes significantly, such as during changes of the season. • After adjusting the black balance, and [Serial] or [IP] of [Tracking Data Output] is set to [On], the tracking data output may be delayed or the value may not be updated. (→ page 64) When performing operations from a controller When using an AW-RP150 or AW-RP60 For details, refer to the operating instructions for the controller. Automatic adjustment When performing operations from a wireless remote control In Step 9 for "Automatic adjustment" (→ page 43) of "White balance adjustment", when you press and hold the button for approximately 2 seconds, auto black balance adjustment (ABB) is executed and the black balance is set. When this takes place, the lens is closed and then the adjustment is performed so the screen will temporarily turn black. • When the black balance adjustment is completed successfully, the "ABB OK" message appears at the center of the screen. ABB OK • Adjustment cannot be performed while the color bar is displayed. Switch to the camera image by pressing the button. • The black balance cannot be adjusted during preset playback. 45