Panasonic AW-UE100 Operating Instructions - Page 39

What to do when encountering problems in the basic shooting operations

Get Panasonic AW-UE100 PDF manuals and user guides View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

What to do when encountering problems in the basic shooting operations If the trouble is not resolved by taking the action suggested below, refer to "Troubleshooting" (→ page 165). When performing operations from a wireless remote control The unit does not move. • Press the , , or button to select the unit which is to be operated. If only one unit is being used, it is normally selected using the button. • Check that the IR ID switches have been set correctly. (→ page 19, page 30) • If the unit's status display lamp is off or lights up orange, it means that the unit's power is not on. Refer to "Turning the power on" (→ page 35), and turn on the power. • If the unit's status display lamp does not blink even when the wireless remote control is operated near the unit's wireless remote control signal light-sensing area, it means that the wireless remote control's batteries have run down. Replace the batteries. Multiple color bands (color bars) are displayed. Switch to the camera image by pressing the button. The menu screen is displayed. Press the button for 2 seconds to exit the camera menu. The lens focus is not adjusted automatically. Press the button to switch to auto focusing. The camera picture is too light or too dark. • Press the button to switch the lens iris adjustment to auto. • Press the button of to switch the gain adjustment to auto. Something is wrong with the coloring of the camera pictures. Refer to "Auto tracking white adjustment (ATW)" (→ page 44), and switch to [ATW]. The camera menus are not displayed. Restart the camera and open any of the camera menus within about a minute, the menus will be displayed in all the outputs. Check [OSD Mix/Crop Marker] (→ page 68) on the camera menu [Output 4/5] screen. When performing operations from a controller The unit does not move. • Select the unit to be operated by following the procedure below. When using an AW-RP150 or AW-RP60 For details, refer to the operating instructions for the controller. • If the unit's status display lamp is off or lights up orange, it means that the unit's power is not on. Refer to "Turning the power on" (→ page 35), and turn on the power. • Check that the account settings for this unit have been set correctly. (→ page 94) • Network connection with AW-RP150 or AW-RP60 requires setup of an initial account. (→ page 33) When an initial account is not set up, AW-RP150 or AW-RP60 can detect but cannot control this unit. Multiple color bands (color bars) are displayed. Switch to the camera image by pressing the button. The lens focus is not adjusted automatically. Press the button of to switch to auto focusing. The camera picture is too light or too dark. • Press the button of to switch the lens iris adjustment to auto. • Press the button of to switch the gain adjustment to auto. Something is wrong with the coloring of the camera pictures. Refer to "Auto tracking white adjustment (ATW)" (→ page 44), and switch to [ATW]. The camera menus are not displayed. Restart the camera and open any of the camera menus within about a minute, the menus will be displayed in all the outputs. Check [OSD Mix/Crop Marker] (→ page 68) on the camera menu [Output 4/5] screen. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
If the trouble is not resolved by taking the action suggested below, refer
to “Troubleshooting” (→ page 165).
When performing operations from a wireless
remote control
The unit does not move.
• Press the <CAM1>, <CAM2>, <CAM3> or <CAM4> button to select
the unit which is to be operated.
If only one unit is being used, it is normally selected using the <CAM1>
button.
•
Check that the IR ID switches have been set correctly. (→ page 19,
page 30)
• If the unit’s status display lamp is off or lights up orange, it means that
the unit’s power is not on.
Refer to “Turning the power on” (→ page 35), and turn on the power.
• If the unit’s status display lamp does not blink even when the wireless
remote control is operated near the unit’s wireless remote control
signal light-sensing area, it means that the wireless remote control’s
batteries have run down.
Replace the batteries.
Multiple color bands (color bars) are displayed.
Switch to the camera image by pressing the <MODE> button.
The menu screen is displayed.
Press the <MENU> button for 2 seconds to exit the camera menu.
The lens focus is not adjusted automatically.
Press the <A/FOCUS> button to switch to auto focusing.
The camera picture is too light or too dark.
• Press the <A/IRIS> button to switch the lens iris adjustment to auto.
• Press the <AUTO> button of <GAIN> to switch the gain adjustment to
auto.
Something is wrong with the coloring of the camera
pictures.
Refer to “Auto tracking white adjustment (ATW)” (→ page 44), and
switch to [ATW].
The camera menus are not displayed.
Restart the camera and open any of the camera menus within about a
minute, the menus will be displayed in all the outputs.
Check [OSD Mix/Crop Marker] (→ page 68) on the camera menu
[Output 4/5] screen.
When performing operations from a controller
The unit does not move.
• Select the unit to be operated by following the procedure below.
When using an AW-RP150 or AW-RP60
For details, refer to the operating instructions for the controller.
• If the unit’s status display lamp is off or lights up orange, it means that
the unit’s power is not on.
Refer to “Turning the power on” (→ page 35), and turn on the power.
• Check that the account settings for this unit have been set correctly.
(→ page 94)
• Network connection with AW-RP150 or AW-RP60 requires setup of an
initial account. (→ page 33)
When an initial account is not set up, AW-RP150 or AW-RP60 can
detect but cannot control this unit.
Multiple color bands (color bars) are displayed.
Switch to the camera image by pressing the <BARS> button.
The lens focus is not adjusted automatically.
Press the <AUTO> button of <FOCUS> to switch to auto focusing.
The camera picture is too light or too dark.
• Press the <AUTO> button of <IRIS> to switch the lens iris adjustment
to auto.
• Press the <AUTO> button of <GAIN> to switch the gain adjustment to
auto.
Something is wrong with the coloring of the camera
pictures.
Refer to “Auto tracking white adjustment (ATW)” (→ page 44), and
switch to [ATW].
The camera menus are not displayed.
Restart the camera and open any of the camera menus within about a
minute, the menus will be displayed in all the outputs.
Check [OSD Mix/Crop Marker] (→ page 68) on the camera menu
[Output 4/5] screen.
What to do when encountering problems in the basic shooting operations
39