Panasonic AW-UE100 Operating Instructions - Page 47

Genlock adjustment The genlock adjustment is performed to achieve phase alignment by applying external synchronization (genlock) when a multiple number of cameras will be used or when the unit will be used in combination with other devices. This unit supports BBS (Black Burst Sync) and tri-level sync external synchronization signals. Ask your dealer to perform this adjustment. (Use a dual-trace oscilloscope for the adjustment.) Horizontal phase adjustment Observe the waveforms of the external sync signal input (tri‑level sync signal) and video signal output on the dual‑trace oscilloscope, and use the wireless remote control or controller to bring the horizontal phase into alignment. External sync signal input (tri‑level sync signal) Video signal output Bring the horizontal phase into alignment. Example: When the tri‑level sync phase is adjusted When performing operations from a wireless remote control 1. Follow the operation steps in "Basic setup operations" (→ page 48) to display the Top Menu. 2. Press the or button to bring the cursor to [System]. Top Menu Camera System Output UHD Crop Pan/Tilt Preset Maintenance 4. Press the or button to bring the cursor to [Horizontal Phase], and press the button. The [Horizontal Phase] value starts blinking. System 1/2 Frequency Format UHD Crop Crop Zoom Shooting Mode Genlock Horizontal Phase 59.94Hz 2160/59.94p Off Off Normal 0 Return 5. Press the or button to change the [Horizontal Phase] value, adjust the value so that the horizontal phase is brought into alignment, and press the button. 6. Press and hold the button for about 2 seconds. The camera menu display is exited. 3. Press the button. The [System 1/2] screen appears. 47