Panasonic AW-UE100 Operating Instructions - Page 122
Auto Iris Speed [Slow, Normal, Fast], Shutter Mode [Off, Step, Synchro, ELC]
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Web screen configurations (continued) Picture Level [-50 to +50] This menu item is selected to set the target picture level for automatic exposure compensation. Its setting takes effect when [Auto] or [ELC] has been selected as the setting for any of the following automatic exposure compensation functions. • When [Iris Mode] is set to [Auto] • When [Shutter Mode] is set to [ELC] • When [Gain] is set to [Auto] • When [Frame Mix] is set to [Auto] Factory settings: 0 Iris Mode [Manual, Auto] This menu item is used to select whether the iris is to be adjusted automatically or manually. Manual The iris is adjusted manually. Auto Auto exposure compensation is performed so that the target level which was set using [Picture Level] is reached. Factory settings: Auto Auto Iris Speed [Slow, Normal, Fast] Set the control speed of the auto iris function. Slow Control the iris at a slow speed. Normal Control the iris at a normal speed. Fast Control the iris at a fast speed. Factory settings: Normal Auto Iris Window [Normal1, Normal2, Center] Select the detection window for the auto iris. Normal1 Window towards the center of the screen. Normal2 Window towards the bottom of the screen. Center Spotted window in the center of the screen. Factory settings: Normal1 Iris Limit [Off, On] When [Iris Mode] is [Manual], set the function for limiting the iris from closing to Off/On. Off The iris will operate within the entire range from OPEN to CLOSE. On Set the limit so that the iris does not CLOSE. Factory settings: Off • This is enabled only when [Iris Mode] is [Manual]. • Even if this function is set to [On], the iris OPEN direction limit is not applied. However, even if this function is set to [On], when auto black balance adjustment (ABB) is executed, it is necessary to CLOSE the iris before performing adjustment. Shutter Mode [Off, Step, Synchro, ELC] Select for camera shutter mode. Off The shutter is set to OFF. Step The step shutter is set (the steps can be changed). Synchro The synchro shutter is set (the setting can be changed continuously). ELC The electronic shutter is controlled and the light quantity is adjusted automatically. Factory settings: Off Step/Synchro This is used to adjust the shutter speed in the mode which was selected as the [Shutter Mode] setting. When a higher shutter speed is selected, fast-moving subjects do not become blurred easily but the images will be darker. The shutter speeds that can be set are listed below. When [Step] is selected as the [Shutter Mode] When [Synchro] is selected as the [Shutter Mode] 59.94p/59.94i 1/60, 1/100, 1/120, 1/250, mode 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 60.0 Hz to 7200 Hz 29.97p mode 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 30.0 Hz to 7200 Hz 23.98p/24p mode 1/24, 1/48, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 24.0 Hz to 7200 Hz 50p/50i mode 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 50.0 Hz to 7200 Hz 25p mode 1/25, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000 25.0 Hz to 7200 Hz Factory settings: When [Shutter Mode] is set to [Step] [59.94Hz] 1/100 [50Hz] 1/120 When [Shutter Mode] is set to [Synchro] [59.94Hz] 60.0Hz [50Hz] 50.0Hz • When [Shutter Mode] is set to [Off] in 29.97p, 23.98p/24p, or 25p mode, the shutter speed is set to [1/50]. ELC Limit [1/100, 1/120, 1/250] Set the maximum shutter level when ELC is operating. Factory settings: 1/250 122