Panasonic AW-UE100 Operating Instructions - Page 97
Web screen operations continued, Compression button [Compression], Stream buttons [Stream]
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Web screen operations (continued) 1. Menu switching [Stream Menu]/[Other Menu] Switch between menu displays. Clicking [Other Menu] when the Stream menu is displayed displays the Other menu. Clicking [Stream Menu] when the Other menu is displayed displays the Stream menu. 2. Compression button [Compression] [H.264] The [H.264] button turns gray, and H.264 images are displayed. The [H.264] button is enabled when the [H.264 transmission] setting of [H.264(1)] to [H.264(4)] on the Video over IP is [On]. (→ page 113) [JPEG] The [JPEG] button turns gray, and JPEG images are displayed. • In the following cases, the selection status of the [Compression] buttons will return to the setting configured in the [Video over IP] [Initial display setting] - [Stream] (→ page 112). - When returning from another screen - When the screen is updated 3. Stream buttons [Stream] When H.264 is selected These buttons appear only when H.264 images are displayed. When selected, the button turns gray, and the images in the main area appear according to the settings [1] configured for [H.264(1)]. (→ page 113) When selected, the button turns gray, and the images in the main area appear according to the settings [2] configured for [H.264(2)]. (→ page 113) When selected, the button turns gray, and the images in the main area appear according to the settings [3] configured for [H.264(3)]. (→ page 113) When selected, the button turns gray, and the images in the main area appear according to the settings [4] configured for [H.264(4)]. (→ page 113) • In the following cases, the selection status of the [Stream] buttons will return to the setting configured in the [Video over IP] - [Initial display setting] - [Stream] (→ page 112). - When returning from another screen - When the screen is updated • If the H.264 image resolution is set to [1920x1080] or [1280x720], the image may be compressed depending on the size of the web browser window. When JPEG is selected These buttons appear only when JPEG images are displayed. When selected, the button turns gray, and the images in the main area appear according to the settings [1] configured for [JPEG(1)]. (→ page 112) When selected, the button turns gray, and the images in the main area appear according to the settings [2] configured for [JPEG(2)]. (→ page 112) When selected, the button turns gray, and the images in the main area appear according to the settings [3] configured for [JPEG(3)]. (→ page 112) • The resolution selected with [JPEG(1)], [JPEG(2)], and [JPEG(3)] (→ page 112) under [JPEG] in the [Video over IP] will be used. • If the resolution is set to [1920x1080] or [1280x720], the image may be compressed depending on the size of the web browser window. • In the following cases, the selection status of the [Image Capture Size] buttons will return to the setting configured in the [Video over IP] - [Initial display setting] - [Stream] (→ page 112). - When returning from another screen - When the screen is updated 4. OSD Menu Operation [OSD Menu] [ON] [OFF] Use this to select whether the camera's onscreen displays are to be shown. [Cancel] It cancels the selection of the setting which is being changed. It restores the pre-change setting. OK] Use these to perform the menu operations. The items are selected using the buttons. If a selected item has a sub menu, this sub menu is displayed by pressing the [OK] button. When the cursor is moved to any item on the bottom-level setting screen and the [OK] button is pressed, the setting of the selected item starts flashing. A setting for a regular menu item is reflected immediately if it is changed while it is still flashing. However, there are a number of menu items whose setting is reflected only after the [OK] button has been pressed, causing the setting to stop flashing and the new setting to be entered. 5. Color bar button [Color bar] [ON] [OFF] [Type1] [Type2] Switch the color bar signal displayed or hide. Switch the color bar displayed between Type1 and Type2. This is only enabled when [Color bar] is set to [ON]. 97