Panasonic AW-UE100 Operating Instructions - Page 142
Manual [On, Off], Default gateway, DNS [Auto, Manual], Primary server address
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Web screen configurations (continued) zzIPv6 network Manual [On, Off] Enable or disable manual configuration of the IPv6 address. On Enter the IPv6 address manually. Off Disable manual entry of the IPv6 address. Factory settings: Off IP address(IPv6) When [Manual] is set to [On], the IPv6 address must be entered manually. Be sure to enter an address unique from other devices. • When connecting to the manually specified IP address through a router, use an IPv6-compatible router, and enable the automatic configuration function for the IPv6 address. Be sure to configure an IPv6 address that includes the prefix information provided by the IPv6-compatible router. For details, refer to the operating instructions for the router. • Link local address cannot be set. Default gateway When [Manual] is set to [On] for [IPv6 network], enter the default gateway for the unit's IPv6 network. Factory settings: blank • It is not possible to set the default gateway when [DHCPv6] is [On]. DHCPv6 [On, Off] Enable or disable use of the IPv6 DHCP function. Configure the DHCP server so that the same IP address is not configured for a personal computer that does not use the DHCP function and other network cameras. For details on server settings, consult your network administrator. On Use the IPv6 DHCP function. Off Do not use the IPv6 DHCP function. Factory settings: Off DNS [Auto, Manual] Set whether the DNS server address is to be acquired automatically (Auto) or to be manually input (Manual). The DNS setting needs to be performed if [Manual] is set. When using the DHCP function, if you set to [Auto], then the DNS server address will be acquired automatically. Consult the system administrator regarding the settings. Factory settings: Manual Primary server address Secondary server address Enter the IPv4/IPv6 address of the DNS server. For details on the IPv4/IPv6 address of the DNS server, consult your system administrator. zzCommon (to IPv6/IPv4) HTTP port [1 to 65535] Port numbers are allocated separately. The following port numbers are used by the unit so they cannot be used. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 546, 547, 554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900, 59000 to 61000 Factory settings: 80 Max RTP packet size [Unlimited‑1500byte, Limited‑1280byte] Specify whether to limit the size of RTP packets sent from the camera when using RTP to view camera images. Unlimited‑1500byte Unlimited (1500 byte) Limited‑1280byte Limited (1280 byte) Factory settings: Unlimited‑1500byte Normally, it is recommended that the [Unlimited‑1500byte] setting be used. Select [Limited‑1280byte] when the packet size of the used communication line is limited. For details on the maximum packet size of communication lines, consult your network administrator. HTTP max segment size (MSS) [Unlimited(1460byte), Limited(1280byte), Limited(1024byte)] Select whether to limit the maximum segment size (MSS) transmitted by a camera when viewing camera images using HTTP. Unlimited(1460byte) Unlimited (1460 byte) Limited(1280byte) Limited (1280 byte) Limited(1024byte) Limited (1024 byte) Factory settings: Unlimited(1460byte) Normally, it is recommended that the default setting be used. Select [Limited(1024byte)]/[Limited(1280byte)] when the maximum segment size (MSS) of the used communication line is limited. For details on the maximum segment size (MSS) of communication lines, consult your network administrator. 142