Panasonic AW-UE100 Operating Instructions - Page 129
Focus Mode [Manual, Auto], Zoom Mode [Opt.Zoom, i.Zoom, O.I.S. Mode, Off, O.I.S., HybridSTABLE
View all Panasonic AW-UE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Web screen configurations (continued) Lens setting screen [Lens] The setting is confirmed with the [Set] button. Focus Mode [Manual, Auto] Select auto or manual mode for the focus adjustment function. Manual Adjust focus manually. Auto Always adjust focus automatically. Factory settings: Auto Crop AF [Off, On] Selects Off/On for the focus adjustment function on images specified within the Crop frame in [Crop Out] of [UHD Crop]. Off Automatically adjusts the focus to suit the subject shown in the entire image and not the Crop frame. On Automatically adjusts the focus to suit the subject shown in the crop frame specified in [Crop Out] of [UHD Crop]. Factory settings: Off • This is enabled only when [Crop Mode] is [Crop(1080)] or [Crop(720)]. • If the ratio specified with [Crop Zoom Ratio] is high, the camera may focus on a subject outside the Crop frame. Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom] Set the maximum magnification rate for zoom. Opt.Zoom Use only optical zoom. Optical zoom up to 24× is possible. i.Zoom Enable the i.Zoom function. When this function is enabled, digital zoom is used while reducing image degradation. When [Format] in the [System] screen is 2160/59.94p, 2160/29.97p, 2160/50p, 2160/25p, 2160/24p, 2160/23.98p Up to 28× zoom is possible combining optical zoom and digital zoom. • When [Format] in the [System] screen is other than one of these, up to 36× zoom is possible combining optical zoom and digital zoom. D.Zoom Enable the digital zoom function. Higher digital zoom magnifications will result in coarser images. Factory settings: Opt.Zoom • This is disabled and functions as [Opt.Zoom] when [Crop Mode] is [Crop(1080)] or [Crop(720)]. Max Digital Zoom [×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10] Set the maximum digital zoom magnification. This is only enabled when [Zoom Mode] is set to [D.Zoom]. Factory settings: ×10 • Higher digital zoom magnifications will result in coarser images. Digital Extender [Off, ×1.4, ×2.0] Make settings for the digital extender function. Off Turn the digital extender function off. ×1.4 The digital zoom will be fixed at 1.4×. ×2.0 The digital zoom will be fixed at 2.0×. This is only enabled when [Zoom Mode] is set to [Opt.Zoom]. Factory settings: Off O.I.S. Mode [Off, O.I.S., Hybrid(STABLE), Hybrid(PAN/TILT)] Sets the mode for optical image stabilization (OIS) and roll direction electronic image stabilization (EIS). Off Turns the optical image stabilization (OIS) function and electronic image stabilization (EIS) function Off. O.I.S. Turns the optical image stabilization (OIS) function On. Hybrid (STABLE) Turns the optical image stabilization (OIS) function and roll direction electronic image stabilization (EIS) function On. Use with a pan/tilt fixed shooting scene. Hybrid (PAN/TILT) Turns the optical image stabilization (OIS) function and roll direction electronic image stabilization (EIS) function On. Use with a scene for increasing the image stabilization effect during a shooting while performing the pan/tilt operation. Factory settings: Off • In [O.I.S.] or [Hybrid(STABLE)] mode, the optical image stabilization (OIS) function's level of correction is reduced during pan/tilt operations in order to minimize the convergence resulting from image stabilization during pan/tilt operations. • In [Hybrid(PAN/TILT)] mode, as importance is given to heighten the image stabilization effect during pan/tilt operations, the convergence resulting from image stabilization during pan/tilt control may be a cause for concern in some scenes. Use [O.I.S.] or [Hybrid(STABLE)] for scenes where the convergence resulting from image stabilization needs to be restrained. 129