Panasonic AW-UE100 Operating Instructions - Page 119

High bandwidth NDI, Multicast Transmit [On, Off]

Page 119 highlights

Web screen configurations (continued) Max bit rate(per client) [512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps, 14336kbps, 16384kbps, 20480kbps, 24576kbps] Specify the NDI|HX bit rate per client. Factory settings: 10240kbps • The NDI|HX bit rate setting range depends on the resolution. Image quality This cannot be configured on [NDI|HX stream] screen. Transmission type The same as H.264 Transmission type (→ page 114). Unicast port(Image) The same as H.264 Unicast port(Image) (→ page 115). Unicast port(Audio) The same as H.264 Unicast port(Audio) (→ page 115). Multicast address The same as H.264 Multicast address (→ page 115). Multicast port The same as H.264 Multicast port (→ page 115). Multicast TTL/HOPLimit The same as H.264 Multicast TTL/HOPLimit (→ page 115). • When [IP(UDP)] of [Tracking Data Output] is set to [On], video transmission via IP may be delayed or the video may suffer frame loss. (→ page 136) We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off] in the NDI|HX mode. • When the authentication feature is enabled, the unit may not be connected in NDI|HX mode. In the NDI|HX mode, set [User auth.] (→ page 139) and [Host auth.] (→ page 140) to [Off]. • In NDI|HX mode, [IP Out1] and [IP Out2] in the [UHD Crop] screen will have a linked operation. zzHigh bandwidth NDI Make NDI transmission settings. The setting is confirmed with the [Set] button. High bandwidth NDI Format Displays the resolution of NDI images. • For the resolution set to Format, confirm the output conditions for each video format (→ page 20). Source name Set the device name displayed when this unit is detected by software applications and hardware compatible with NDI. Factory settings: NDI Device [serial number of this unit] Protocol [TCP, UDP] Sets the format of unicast transmission to be used. Factory settings: TCP Multicast Transmit [On, Off] Sets whether to perform multicast transmission of images for the software applications and hardware compatible with NDI. Factory settings: Off Address(IPv4) [IPv4 : 244.0.0.0 to 239.255.255.255] Enter the multicast IP address. Images and audio will be sent to the specified IP address. Factory settings: 239.192.0.30 • Verify usable multicast IP addresses before entering this setting. 119

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180

Max bit rate(per client)
[512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps,
4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps,
14336kbps, 16384kbps, 20480kbps, 24576kbps]
Specify the NDI|HX bit rate per client.
Factory settings:
10240kbps
<NOTE>
• The NDI|HX bit rate setting range depends on the resolution.
Image quality
This cannot be configured on [NDI|HX stream] screen.
Transmission type
The same as H.264 Transmission type (→ page 114).
Unicast port(Image)
The same as H.264 Unicast port(Image) (→ page 115).
Unicast port(Audio)
The same as H.264 Unicast port(Audio) (→ page 115).
Multicast address
The same as H.264 Multicast address (→ page 115).
Multicast port
The same as H.264 Multicast port (→ page 115).
Multicast TTL/HOPLimit
The same as H.264 Multicast TTL/HOPLimit (→ page 115).
<NOTE>
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 136)
We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off] in
the NDI|HX mode.
• When the authentication feature is enabled, the unit may not be
connected in NDI|HX mode.
In the NDI|HX mode, set [User auth.] (→ page 139) and [Host
auth.] (→ page 140) to [Off].
• In NDI|HX mode, [IP Out1] and [IP Out2] in the [UHD Crop] screen
will have a linked operation.
z
High bandwidth NDI
Make NDI transmission settings.
The setting is confirmed with the [Set] button.
High bandwidth NDI
Format
Displays the resolution of NDI images.
<NOTE>
• For the resolution set to Format, confirm the output conditions for
each video format (→ page 20).
Source name
Set the device name displayed when this unit is detected by software
applications and hardware compatible with NDI.
Factory settings:
NDI Device [serial number of this unit]
Protocol [TCP, UDP]
Sets the format of unicast transmission to be used.
Factory settings:
TCP
Multicast Transmit [On, Off]
Sets whether to perform multicast transmission of images for the
software applications and hardware compatible with NDI.
Factory settings:
Off
Address(IPv4)
[IPv4 : 244.0.0.0 to 239.255.255.255]
Enter the multicast IP address.
Images and audio will be sent to the specified IP address.
Factory settings:
239.192.0.30
<NOTE>
• Verify usable multicast IP addresses before entering this setting.
119
Web screen configurations (continued)