Sony LF-X1 Operating Instructions - Page 128
Basic Settings
View all Sony LF-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Basic Settings Open the [Settings] window and select [Basic]. The [Basic] window appears. By selecting one of the options in the [Basic] window, you can perform the following settings. A Clock Sets the current date, time, and time zone. If the clock is not set correctly, some web pages may not display properly. Make sure to adjust the clock when it is incorrect. Also note that if you change the time zone and select [OK], the monitor will restart. Note The set time does not automatically shift to Daylight Saving Time. Select a time zone from the list and change to DST. B Timer Sets the Sleep Timer and Power Save Timer Sleep Timer:Sets the monitor to turn off automatically. If you leave home or fall asleep without turning off the monitor, this function turns it off automatically once the preset time (30, 60, or 90 minutes) has elapsed. (The base station does not turn off.) The Sleep Timer works even when using functions other than TV and video. Power Save Timer: Sets the Power Save Timer to activate and conserve battery power when you have not used the monitor for a while. When the timer activates, the monitor 128 backlight shuts off and the screen goes dark. * The Power Save Timer does not function while in use with the AC adapter. C Stylus Calibration Calibrates the touch screen and stylus. If the touch screen registers a different selection than where you indicate with the stylus, you can perform this calibration so selections register accurately. Note To select items on the screen, use only the stylus and do not use other objects such as a pen or a stick. Doing so can scratch the screen or cause it to crack. D Sound Turns on and off the operation beep that sounds when you operate the monitor. E Storage Size In addition to checking the available memory on the monitor, you can also check the memory on a "Memory Stick" (LF-X1) or a CompactFlash card (LF-X5). F Initialize (1 page 135) Allows you to return all settings to the factory defaults, to reset only the settings for the monitor or base station, and to initialize (format) a "Memory Stick" (LF-X1) or a CompactFlash card (LF-X5).