Sony PDWHD1500 User Manual (PDW-HD1500 / PDW-F1600 Operation Manual for Firmwa - Page 114
Operating on files, Exiting file operations, For Windows XP or Windows Vista, For Windows 7
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Operating on files 1 Start Explorer. Check that a drive letter has been assigned to this unit. (The drive letter will differ depending on the number of other peripherals connected to the remote computer.) 2 Use Explorer to perform file operations on the disc loaded in this unit. You can operate in the same way that you operate on local drives and files on network computers. Notes • If you power this unit off during a FAM connection, the data transferred thus far is discarded. • All file operations are not possible for some types of files. For details, see "File operation restrictions" (page 107). To eject discs from a remote computer Right click the icon representing this unit in Explorer, and select "Eject" from the menu which appears. Exiting file operations For Windows XP or Windows Vista Note Do not disconnect the cable before performing steps 1 to 3. 1 Do one of the following on the or icon displayed in the remote computer's taskbar. • Double click. • Right click, and select the "Safely Remove Hardware". The "Safely Remove Hardware" dialog appears. 2 Select "Sony XDCAM PDW-****** IEEE 1394 SBP2 Device" (******: "F1600" or "HD1500") and click "Stop". The "Stop a Hardware device" dialog appears. 3 Select "Sony XDCAM PDW-****** IEEE 1394 SBP2 Device" (******: "F1600" or "HD1500") and click "OK". • Windows XP: "Sony XDCAM PDW-****** IEEE 1394 SBP2 Device" (******: "F1600" or "HD1500") is deleted from the "Hardware devices" list. • Windows Vista: A message appears to inform you that you can now safely remove the device from your computer. This unit can now resume normal operations. (The limitations described in "Operation limitations during FAM connections" no longer apply.) 4 Disconnect the i.LINK cable as required. For Windows 7 Note Do not disconnect the cable before performing step 1. 1 Click the icon displayed in the remote computer's taskbar, and then click "Eject Solid state disk". "The 'Sony XDCAM PDW-****** IEEE 1394 SBP2 Device' device can now be safely removed from the computer" (******: "F1600" or "HD1500") appears. This unit can now resume normal operations. (The limitations described in "Operation limitations during FAM connections" no longer apply.) 2 Disconnect the i.LINK cable as required. To reconnect To reconnect after exiting file operations, do one of the following, depending on whether an i.LINK cable is connected. i.LINK cable is not connected: Connect this unit and a remote computer with an i.LINK cable. i.LINK cable is connected: Disconnect the i.LINK cable from either this unit or the remote computer, wait for at least 10 seconds, and then reconnect the disconnected cable. The unit is powered off and an i.LINK cable is connected: Power the unit on. You can enable and disable FAM connection from the function menu. For details, see page 52. Chapter 6 File Operations 114 File Operations in File Access Mode (for Windows)