Sony PDWHD1500 User Manual (PDW-HD1500 / PDW-F1600 Operation Manual for Firmwa - Page 45
Superimposed Text Information
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 3 Preparations Synchronizing with embedded LTC input to the SD/HDSDI INPUT connector 1 Input an HDSDI signal containing embedded LTC to the SD/HDSDI INPUT connector, and a reference video signal to the REF. VIDEO INPUT connector. 2 Make the following settings on page P5 TC of the function menu. • Set TCG to "SDI". • Set PRST/RGN to "TC". Executing either of these procedures starts the internal timecode generator running in synchronization with the external timecode generator. Once the internal timecode generator is synchronized with the external timecode generator, the internal timecode generator continues to run even if the external timecode generator connection is removed. The timecode advance mode is set automatically to Free Run. The frame count mode (for system frequency 59.94i/ 59.94P/29.97P only) is set to the same mode as the external timecode signal (drop-frame or non-drop-frame). To check the synchronization to the external signal Press the STOP button to stop this unit, then press the REC button. Check that the timecode value shown in the time data display coincides with the external timecode value. To record external timecode directly (External Preset) When you use this method, the internal timecode generator advances without being affected by the external timecode. To directly record timecode input to the TIME CODE IN connector Input the timecode output of an external device to the TIME CODE IN connector, and make the following settings on page P5 TC of the function menu. • Set TCG to "EXT". • Set PRST/RGN to "PRESET". Superimposed Text Information The video signal output from the COMPOSITE OUTPUT 2 (SUPER) connector, SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector contains superimposed text information, including timecode, menu settings, and alarm messages. Adjusting the text display You can adjust the position, size and type of the superimposed text using setup menu items 002, 003, 005, 009, 011, and 012. For details, see "Items in the basic menu" (page 124). Information displayed 1 Type of time data 2 Timecode reader drop frame mark (for 59.94i/59.94P/29.97P mode only) 3 Timecode generator drop frame mark (for 59.94i/ 59.94P/29.97P mode only) Time data 4 VITC field mark TCR 0 0 : 0 4 . 4 7 . 0 7 * PLAY L OC K 5 Operation mode 6 Playback condition mark/Disc exchange cache mark Note The display shown above corresponds to the factory default settings of the unit. You can change the type of information to be displayed in the lower line of the display by changing the setting of setup menu item 005 DISPLAY INFORMATION SELECT. For details, see "Items in the basic menu" (page 124). 45 Superimposed Text Information