Sony PDWHD1500 User Manual (PDW-HD1500 / PDW-F1600 Operation Manual for Firmwa - Page 169
Alarms relating to audio and video signals, Check the setting of V INPUT on P1 VIDEO
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Alarm message in GUI screen Description/action A File with the Name you Specified Already Exists. Specify a Different Name. This appears when an attempt is made to set an existing clip name while changing the clip name using Set Clip Name. Set NAMING FORM to "free" This appears when an attempt is made to change the clip name using Set Clip Name even though NAMING FORM is not set to "free" (see page 111). "No Flash Drive" This appears when an attempt is made to select "USB Flash Drive" in the media selection screen under Load Planning Metadata/Select Drive even though the USB memory is not connected. Not Loaded. This appears when a command related to planning metadata is executed with no planning metadata loaded. Load planning metadata and try again. Syntax Error! This appears when loading of planning metadata fails because of a syntax error. Correct the syntax error and try loading the metadata again. Irregular Disc is Used. Use Professional Disc. This appears when the unit is unable to record or play the inserted disc. This unit can record and play Professional Discs. Insert a Professional Disc. The Disc Write Protect TAB This appears when an attempt is made to format a write-protected disc. is set to Save. Try formatting the disc after moving the write protect tab away from the Save position. The REC Inhibit Mode is Selected. Check Function Menu. This appears when an attempt was made to format when function menu item HOME >F3: REC INH is set to "ON". Set F3: REC INH to "OFF" and try formatting again. Auto Formatting was not Completed. This appears when auto formatting fails. Video Resolution Differ from This appears when an attempt is made to add a clip to a clip list containing clips with a different it on Clip List. video resolution (number of system lines). It is not possible to add clips to clip lists containing clips with a different video resolution. No Clip Meets the Condition. This appears when no clip is found to meet clip filtering conditions. Alarms relating to audio and video signals Alarm message in time data display area No INPUT! a) EMPHASIS! a) REF NON-STD Alarm message in video monitor screen Action INPUT VIDEO IS NOT DETECTED. CHECK THE VIDEO INPUT MODE AND SUPPLY A VIDEO SIGNAL TO VIDEO INPUT. • Check the setting of V INPUT on Page P1 VIDEO of the function menu (see page 49). • Input an HDSDI signal. INPUT AUDIO EMPHASIS IS NOT SUPPORTED. CHECK THE EMPHASIS OF THE AUDIO INPUT SIGNAL. Check the emphasis of the audio input signal. A NON-STANDARD REF SIGNAL IS BEING USED FOR REF VIDEO. USE A STANDARD SIGNAL. Input a standard signal. a) Displayed only when setup menu item 016 ALARM DISPLAY is set to "on". Appendix 169 Troubleshooting