Sony PDWHD1500 User Manual (PDW-HD1500 / PDW-F1600 Operation Manual for Firmwa - Page 146
Extended menu operations, To enable display of the extended menu
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Menu items in the 900s, relating to digital process Item number Item name 965 IMAGE ENHANCER (INPUT UP CONVERTER) Sub-Item 1 ENH SETTING a) 2 CONVERT 3 H CROP P 4 L BOX P 5 CNV PROC 6 DETAIL 7 LIMITER 8 CRISP 9 DEPEND 10 H DETL F 11 HV RATIO Settings Set up the operation of the up converter image enhancer for SD input, separately from the settings for playback (menu items 950 to 959). pb: While SD signals are input, make the behavior of the image enhancer of the up-converter follow the settings for playback (menu items 950 to 959) (Settings for sub-items 2 to 11 under menu item 965 become invalid). input: While SD signals are input, make the behavior of the image enhancer of the up-converter follow the settings for sub-items 2 to 11 under menu item 965 (separate settings during input of SD signals from those during playback). Select the up-converter mode. CROP: Select the edge-crop mode. L-BOX: Select the letter box mode. SQUEZ: Select the squeeze mode. When sub-item UP CONVERTER MODE of menu item 965 is set to "crop", adjust the H-crop (horizontal crop) position for up converter output in edge crop mode. -120 to 0 to 120 When sub-item UP CONVERTER MODE of menu item 965 is set to "lbox", adjust the vertical location of the position where the picture is cut out for up converter output in letter box mode. -120 to 0 to 120 Select the source picture to use in converting SD to HD. FIELD: Use field pictures. ADAPT: Frame or field is selected automatically. Adjust the up-converter image enhancer. Set the sharpness of edge enhancement. 0 to 40H to 7FH Adjust the up-converter image enhancer. Set the maximum detail level added to emphasize the original signal. 0 to 20H to 3FH Adjust the up-converter image enhancer. Set the threshold amplitude at which low amplitude signals are not emphasized. 0 to 8 to FH Adjust the up-converter image enhancer. Set the luminance range for edge enhancement. 0 to 8 to FH Adjust the up converter image enhancer. Set the center frequency and frequency properties for edge enhancement. 3.2MHz: 3.2 MHz ±1.1 MHz 4.5MHz: 4.5 MHz ±1.4 MHz 5.0MHz: 5.0 MHz ±0.7 MHz 4.0MHz: 4.0 MHz ±2.0 MHz Adjust the up-converter image enhancer. Set the horizontal/vertical ratio for edge enhancement. 0 to 3 to 7 a) HD1500 When the PDBK-S1500 or PDBK-F1500 option is installed. Extended menu operations The extended menu can be used with the same procedures as in the basic menu. However, since with the factory default settings the extended menu is not displayed, it is first necessary to enable display of the extended menu. To enable display of the extended menu Proceed as follows to use the maintenance menu. 1 Holding down the PAGE/HOME button and the SHIFT button, press the MENU button. The maintenance menu appears on the video monitor display. Chapter 7 Menus 146 Setup Menu