Sony PDWHD1500 User Manual (PDW-HD1500 / PDW-F1600 Operation Manual for Firmwa - Page 20
Shuttle dial, Function buttons F1 to F6, Display, PUSH SETS.SEL knob, MENU button
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 2 Names and Functions of Parts setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE to "dial"). e Shuttle dial Turn this for playback in shuttle mode or variable speed mode. Turn clockwise for forward direction playback, and counterclockwise for reverse direction playback. • In shuttle mode, the playback speed varies in the range ±20 times normal speed or in the maximum speed range (as selected by an extended menu setting), according to the angular position of the shuttle dial. 1) • In variable speed mode, you can finely adjust the playback speed from -2 to +2 times normal speed, according to the angular position of the shuttle dial. The shuttle dial has a detent at the center position, for still image playback. Normally, you press the SHTL/JOG button before turning the shuttle dial, but it is also possible to make a setting to enable shuttle mode directly by turning the dial (set setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE to "dial"). 1) Maximum speed is about ±50 times normal speed. However, the maximum speed may vary depending on the state of the clip and the playback position on the disc. Note When setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE is set to "dial", after using the shuttle dial, return it to the center position. If the shuttle dial is not in the center position, it is possible occasionally for vibration from other operations to activate the dial, and start playback in shuttle mode. 4 Display/menu control section 5 RESET/RETURN button 4 MENU button 3 PUSH SET(S.SEL) knob 1 Function buttons (F1 to F6) 2 Display 6 SUB CLIP/DISC MENU button and indicator 7 THUMBNAIL button and indicator 8 DISPLAY button 9 SHIFT button 0 PAGE/HOME button qa EXPAND button qs CHAPTER button a Function buttons (F1 to F6) These buttons are enabled when the function menu (see page 48) is visible. Each press of a button changes the setting of the corresponding item in the menu. For convenience, this manual refers to these buttons as buttons F1 to F6, in order from the top. b Display Displays menus, audio level meters, and data such as time data or clip information. The DISPLAY button lets you switch to the video monitor display. For details, see "Display window" on page 23. c PUSH SET(S.SEL) knob Use for menu and GUI screen operations. Turn the knob to select items, and press it to confirm the selection. This button is also used to set numerical and timecode values. You can also change the playback speed by pressing the PLAY button and turning this knob during playback (see page 66). See "GUI screen operations" (page 75) for more information about how to use the thumbnail screens. d MENU button Displays the setup menu or the GUI screen menu. The setup menu appears when no GUI screen is visible. The same information is also superimposed on the display on a 20 Front Panel