Sony PDWHD1500 User Manual (PDW-HD1500 / PDW-F1600 Operation Manual for Firmwa - Page 124

Item group Items 100 to 199 Items 200 to 299 Items 300 to 399 Items 400 to 499 Items 500 to 599 Function Settings relating to control panels Settings relating to the remote control interface Settings relating to editing operations Settings relating to preroll Refer to page 131 page 133 page 134 page 135 Settings relating to disc protection page 135 Item group Items 600 to 650 Items 651 to 699 Items 700 to 799 Items 800 to 899 Items 900 to 999 Function Settings relating to the timecode generator Settings relating to the metadata and UMID Settings relating to video control Settings relating to audio control Settings relating to digital processing Refer to page 136 page 137 page 139 page 141 page 143 Items in the basic menu The basic menu items (excluding the items related to the digital hours meter) are listed in the following table. • Item names are the names which appear on the video monitor screen of this unit and an external monitor, when the input signals to the monitor are the video signals output from the COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector. • An abbreviated name appears in the time data display area when you press the NEXT button. • The values in the Settings column are the values which appear in the time data display area. (The values may appear in a different format on an external monitor. In this case, the external monitor values are shown in parentheses.) Underlined values are the factory defaults. Item number Item name 001 PREROLL TIME 002 CHARACTER H-POSITION Settings 0 s (0 sec)... 5 s (5 sec)... 30 s (30 sec): Set the preroll time to between 0 and 30 seconds in steps of 1 second. A preroll time of at least 5 seconds is recommended when using this unit for editing. Adjust the horizontal screen position (as a hexadecimal value) of the text information output from the COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector for superimposed display on the monitor. The hexadecimal value 00 is for the far left of the screen. Increasing the value moves the position of the characters to the right. 00 ... 0C ... 28 (When the number of system lines is 1080 and the system frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P.) 00 ... 0B ... 28 (When the number of system lines is 720 and the system frequency is 59.94P or 50P.) Set this item by adjusting to the required position while viewing the monitor. 003 CHARACTER V-POSITION Adjust the vertical screen position (as a hexadecimal value) of the text information output from the COMPOSITE OUTPUT 2 (SUPER) connector, the SDSDI OUTPUT 2 (SUPER) connector, or the HDSDI OUTPUT 2 (SUPER) connector for superimposed display on the monitor. The hexadecimal value 00 is for the top of the screen. Increasing the value lowers the position of the characters. 00 ... 2A ... 32 (When the number of system lines is 1080 and the system frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P.) 00 ... 29 ... 32 (When the number of system lines is 720 and the system frequency is 59.94P or 50P.) Set this item by adjusting to the required position while viewing the monitor. Chapter 7 Menus 124 Setup Menu