TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 118
Instance Port Config, Show All, Clear All, Spanning Tree, MSTP Instance
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Instance Config Select: Instance ID: Status: Priority: VLAN ID: Show All: Clear All: won't be replaced. Click 'Delete' button, the VLAN ID will be delete from the corresponding instance ID. Select the desired Instance ID for configuration. It is multi-optional. Displays Instance ID of the switch. Displays status of the instance. Enter the priority of the switch in the instance. It is an important criterion on determining if the switch will be chosen as the root bridge in the specific instance. Enter the VLAN ID which belongs to the corresponding instance ID. After modification here, the previous VLAN ID will be cleared and mapped to the CIST. Click the Show All button to show all VLAN IDs mapped to the instance ID. Click the Clear All button to clear up all VLAN IDs from the instance ID. The cleared VLAN ID will be automatically mapped to the CIST. Note: In a network with both GVRP and MSTP enabled, GVRP packets are forwarded along the CIST. If you want to announce a specific VLAN through GVRP, please be sure to map the VLAN to the CIST when configuring the MSTP VLAN-instance mapping table. For detailed introduction of GVRP, please refer to GVRP function page. 8.3.3 Instance Port Config A port can play different roles in different spanning tree instance. On this page you can configure the parameters of the ports in different instances as well as view status of the ports in the specified instance. Choose the menu Spanning Tree→MSTP Instance→Instance Port Config to load the following page. 107