TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 173
Interface Config, IP Address/Mask
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Auto Summary: Default Metric: If you select enable groups of adjacent routes will be summarized into single entries, in order to reduce the total number of entries The default is disable. Set the default metric for the redistributed routes. The valid values are (1 to 15). Redistribute Static: Choose to distribute Static router entries to RIP, the default is disable. Redistribute OSPF: Choose to distribute OSPF router entries to RIP, the default is disable. Redistribute Static Metric: Set the metric of redistributed Static routes. The valid values are (0 to 15). Redistribute OSPF Metric: Redistribute OSPF Metric Set the metric of redistributed OSPF routes. The valid values are (0 to 15). Update Timer: he timer interval to generate a complete response to every neighboring gateway. Timeout Timer: Upon expiration of the timeout, the route is no longer valid and set to unreachable. Garbage Timer: Upon expiration of the garbage-collection timer, the route is finally removed from the tables. Network Enable You could add the network to enable RIP protocol here, so the interface in the network would enable RIP protocol. RIP Network List Display the network enabled in the list. You could choose to delete the network here. 10.8.2 Interface Config On this page, you can configure advanced parameters for the RIP. Choose the menu Routing→RIP→Interface Config to load the following page. Figure 10-27 RIP Interface Config The following entries are displayed on this screen: Interface Config Select: IP Address/Mask: Status: Select the interface for which data is to be configured. The interface IP address and subnet mask. You can't change it here. The interface RIP status(up or down) is decided by the network status. You can't change it here. 162