TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 53
Application Example for Stack, Switch Renumber, Network Requirements, Network Diagram
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Figure 5-9 Switch Renumber The following entries are displayed on this screen: Switch Renumber Select: Current Unit: Designated Unit: Role: MAC Address: Select the desired entry. It is multi-optional. Displays the current unit number of the member switch. Configure the unit number of the member switch. Auto: With this option selected, the member switch will be assigned a free unit number automatically. 0-7: With this option selected, the member switch will be assigned this unit number if it has not been used by the other members, otherwise the member switch will be assigned a free unit number automatically. Only the unused unit number is available for you to choose from. The role of the device in a stack. Displays the MAC address of the member switch. 5.2 Application Example for Stack Network Requirements Establish a stack of ring topology with four T3700-28TQ switches. Network Diagram Configuration Procedure Configure switch A, B, C and D before physically connecting them: Step Operation 1 Configure the name. Description stack Optional. On Stack Management→Stack Config page, configure the stack name. 42