TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 167
ARP, IP Address, Subnet Mask, Interface, Status
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
IP Address: Subnet Mask: Interface: Interface Name: Status: Displays the interface's IP address. Displays the interface's subnet mask. Displays the interface. Displays the name of the interface. Enable/Disable the items selected. Example Application Network Requirements 1. PC A and PC B are in the same network segment but belong to VLAN2 and VLAN3 respectively. 2. PC A and PC B can interconnect with each other by using Proxy ARP function. Network Diagram Configuration Procedure Configure the Switch Figure 10-21 ARP Application Step Operation Description 1 Create Interface Required. On Routing→Interface→Interface Config page, create 2 Interface 2 with its IP address as 192.168.2.1, subnet mask as 255.255.255.0, VLAN ID as 2 and interface name as VLAN2. 2 Create Interface Required. On Routing→Interface→Interface Config page, create 3 Interface 3 with its IP address as 192.168.3.1, subnet mask as 255.255.255.0, VLAN ID as 3 and interface name as VLAN3. 3 Enable Proxy Required. On Routing→Proxy ARP→Proxy ARP page, enable Proxy ARP ARP feature for interface 2 and interface 3. 10.7 ARP This page displays the ARP table information. Choose the menu Routing→ARP→ARP Table to load the following page. 156