TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 341
Port Config, Device Class, Select, LLDP-MED Status, Included TLVs, Detail
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Device Class: LLDP-MED devices are comprised of two primary device types: Network Connectivity Devices and Endpoint Devices. In turn, Endpoint Devices are composed of three defined Classes: Class I, Class II and Class III. Bridge is a Network Connectivity Device. 16.4.2 Port Config On this page you can configure all ports' LLDP-MED parameters. Choose the menu LLDP→LLDP-MED→Port Config to load the following page. Figure 16-7 LLDP-MED Port Configuration The following entries are displayed on this screen: LLDP-MED Port Config Select: LLDP-MED Status: Included TLVs: Detail: Select the desired port to configure. Configure the port's LLDP-MED status: Enable: Enable the port's LLDP-MED status, and the port's Admin Status will be changed to Tx&Rx. Disable: Disable the port's LLDP-MED status. Select TLVs to be included in outgoing LLDPDU. Click the Detail button to display the included TLVs and select the desired TLVs. 330