TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 55
Switching, 6.1 Port, 6.1.1 Port Config
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 6 Switching Switching module is used to configure the basic functions of the switch, including four submenus: Port, LAG, Traffic Monitor and MAC Address. 6.1 Port The Port function, allowing you to configure the basic features for the port, is implemented on the Port Config, Port Mirror, Port Security and Port Isolation pages. 6.1.1 Port Config On this page, you can configure the basic parameters for the ports. When the port is disabled, the packets on the port will be discarded. Disabling the port which is vacant for a long time can reduce the power consumption effectively. And you can enable the port when it is in need. The parameters will affect the working mode of the port, please set the parameters appropriate to your needs. Choose the menu Switching→Port→Port Config to load the following page. Figure 6-1 Port Config The following entries are displayed on this screen. Port Config UNIT: Select the unit ID of the desired member in the stack. Select: Select the desired port for configuration. It is multi-optional. Port: Type: Displays the port number. Displays the port medium. 44