TP-Link T3700G-28TQ T3700G-28TQ V1 UG - Page 94
VPN Config, 7.7.2 Port Enable, Protocol type, Value, VPN Config, VLAN Mapping, Port Enable
View all TP-Link T3700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Protocol type LACP 802.1X Value 0x8809 0x888E Table 7-3 Values of Ethernet frame protocol type in common use This VLAN VPN function is implemented on the VPN Config, VLAN Mapping and Port Enable pages. 7.7.1 VPN Config This page allows you to enable the VPN function, adjust the global TPID for VLAN-VPN packets and enable the VPN up-link port. When VPN mode is enabled, the switch will add a tag to the received tagged packet basing on the VLAN mapping entries. Choose the menu VLAN→VLAN VPN→VPN Config to load the following page. Figure 7-12 VPN Global Config The following entries are displayed on this screen: Global Config VPN Mode: Global TPID: Allows you to Enable/Disable the VLAN-VPN function. Enter the global TPID (Tag protocol identifier). VPN Up-link Ports Unit: VPN Up-link ports: Select the unit ID of the desired member in the stack. Select the desired port as the VPN Up-link port. Note: If VPN mode is enabled, please create VLAN Mapping entries on the VLAN Mapping function page. 7.7.2 Port Enable On this page, you can enable the port for the VLAN Mapping function. Only the port is enabled, can the configured VLAN Mapping function take effect. 83