ZyXEL NBG4615 User Guide - Page 132
Wireless Security Screen
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Chapter 15 Wireless LAN See the rest of this chapter for information on the other labels in this screen. 15.3 Wireless Security Screen Use this screen to select the wireless security mode for each SSID. Click Network > Wireless LAN > Security to open the Security screen. The screen varies depending on what you select in the Security Mode field. 15.3.1 No Security Select No Security to allow wireless clients to communicate with the access points without any data encryption. Note: If you do not enable any wireless security on your NBG4615, your network is accessible to any wireless networking device that is within range. Figure 82 Network > Wireless LAN > Security: No Security The following table describes the labels in this screen. Table 47 Network > Wireless LAN > Security: No Security LABEL DESCRIPTION SSID Select the SSID for which you want to configure the security. Security Mode Choose No Security from the drop-down list box. Apply Click Apply to save your changes back to the NBG4615. Cancel Click Cancel to reload the previous configuration for this screen. 15.3.2 WEP Encryption WEP encryption scrambles the data transmitted between the wireless stations and the access points to keep network communications private. It encrypts unicast and multicast communications in a network. Both the wireless stations and the access points must use the same WEP key. Your NBG4615 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be enabled at any one time. Select Static WEP from the Security Mode list. 132 NBG4615 User's Guide