ZyXEL NBG4615 User Guide - Page 95
Table 40, LABEL, DESCRIPTION, Table 41
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 12 WISP Mode Table 40 No Security (WISP) (continued) LABEL DESCRIPTION Apply Click Apply to save your changes back to the NBG4615. Cancel Click Cancel to reload the previous configuration for this screen. 12.5.1 Static WEP Use this screen if the access point to which you want to connect to uses WEP security mode. Figure 68 WEP (WISP) The following table describes the labels in this screen. Table 41 WEP (WISP) LABEL DESCRIPTION WISP Parameters SSID Enter the name of the access point to which you are connecting. Channel Selection The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a channel. The device will automatically select the channel with the least interference. Security Mode Select Static WEP to enable data encryption. PassPhrase Enter a Passphrase (up to 26 printable characters) and click Generate. WEP Encryption ASCII Hex A passphrase functions like a password. In WEP security mode, it is further converted by the NBG4615 into a complicated string that is referred to as the "key". This key is requested from all devices wishing to connect to a wireless network. Select 64-bit WEP or 128-bit WEP. This dictates the length of the security key that the network is going to use. Select this option in order to enter ASCII characters as WEP key. Select this option in order to enter hexadecimal characters as a WEP key. The preceding "0x", that identifies a hexadecimal key, is entered automatically. NBG4615 User's Guide 95