ZyXEL NBG4615 User Guide - Page 205
Remote Management
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
CHAPTER 27 Remote Management 27.1 Overview This chapter provides information on the Remote Management screens. Remote Management allows you to manage your NBG4615 from a remote location through the following interfaces: • LAN and WAN • LAN only • WAN only Note: The NBG4615 is managed using the Web Configurator. 27.2 What You Need to Know Remote management over LAN or WAN will not work when: 1 The IP address in the Secured Client IP Address field (Section 27.3 on page 206) does not match the client IP address. If it does not match, the NBG4615 will disconnect the session immediately. 2 There is already another remote management session. You may only have one remote management session running at one time. 3 There is a firewall rule that blocks it. 27.2.1 Remote Management and NAT When NAT is enabled: • Use the NBG4615's WAN IP address when configuring from the WAN. • Use the NBG4615's LAN IP address when configuring from the LAN. 27.2.2 System Timeout There is a default system management idle timeout of five minutes (three hundred seconds). The NBG4615 automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the System screen NBG4615 User's Guide 205