ZyXEL NBG4615 User Guide - Page 91
WISP Mode Status Screen
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Chapter 12 WISP Mode 2 The default IP address of the NBG4615 is "192.168.1.1". If you did not change this, you can use the same IP address in WISP Mode. Open a web browser such as Internet Explorer and type "192.168.1.1" as the web address in your web browser. If you changed the IP address of your NBG4615 while in Router mode, use this IP address in WISP Mode. The WISP Mode IP address is always the same as the Router mode IP address. Note: After clicking Login, the Easy Mode appears. Refer to Section on page 53 for the Easy Mode screens. Click Expert mode to see the screens described in the sections following this. 12.4 WISP Mode Status Screen Click to open the status screen. Figure 64 Status: WISP Mode The following table describes the labels shown in the Status screen. Table 38 Status Screen: WISP Mode LABEL DESCRIPTION Logout Click this at any time to exit the Web Configurator. Device Information Host Name This is the System Name you enter in the Maintenance > General screen. It is for identification purposes. Firmware Version This is the firmware version and the date created. NBG4615 User's Guide 91