ZyXEL NBG4615 User Guide - Page 54
What You Can Do, What You Need to Know
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 8 Easy Mode Figure 32 Easy Mode: Status Screen Navigation Panel Go to Network Map Screen Status Screen Control Panel 8.2 What You Can Do You can do the following in this mode: • Use this Navigation Panel to opt out of the Easy mode (Section 8.4 on page 55). • Use the Network Map screen to check if your NBG4615 can ping the gateway and whether it is connected to the Internet (Section 8.5 on page 55). • Use the Control Panel to configure and enable NBG4615 features, including wireless security, wireless scheduling and bandwidth management and so on (Section 8.6 on page 56). • Use the Status Screen to view read-only information about the NBG4615, including the WAN IP, MAC Address of the NBG4615 and the firmware version (Section 8.7 on page 62). 8.3 What You Need to Know Between the different device modes, the Control Panel (Section 8.6 on page 56) changes depending on which features are applicable to the mode: • Router Mode: All Control Panel features are available. • Access Point Mode: Only Power Saving and Wireless Security are available. • Universal Repeater Mode: Only Power Saving and Wireless Security are available. • WISP Mode: The available features for this mode are Game Console, Content Filter, Bandwidth MGMT, and Firewall. • WISP + UR Mode: All Control Panel features are available. 54 NBG4615 User's Guide