ZyXEL NBG4615 User Guide - Page 85
Universal Repeater Screen
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 11 Universal Repeater Mode Table 34 Status Screen: Universal Repeater Mode (continued) LABEL Packet Statistics WLAN Station Status Interface Status Interface Status DESCRIPTION Click Details... to go to the Monitor > Packet Statistics screen (Section 6.6 on page 48). Use this screen to view port status and packet specific statistics. Click Details... to go to the Monitor > WLAN Station Status screen (Section 6.7 on page 49). Use this screen to view the wireless stations that are currently associated to the NBG4615. This displays the NBG4615 port types. The port types are: LAN and WLAN. For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected). Rate For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. For the LAN ports, this displays the port speed or N/A when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/ A when the WLAN is disabled. 11.5.0.1 Navigation Panel Use the menu in the navigation panel to configure NBG4615 features in Universal Repeater mode. The following screen and table show the features you can configure in Universal Repeater mode. Figure 57 Menu: Universal Repeater Mode Refer to Table 31 on page 69 for descriptions of the labels shown in the Navigation panel. 11.6 Universal Repeater Screen Use this screen to enter the SSID and select the wireless security mode used by the wireless device to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to open the Universal Repeater screen. The screen varies depending on security mode. NBG4615 User's Guide 85