ZyXEL NBG4615 User Guide - Page 93
Navigation Panel
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 12 WISP Mode Table 38 Status Screen: WISP Mode (continued) LABEL DHCP Table Packet Statistics Interface Status Interface Status DESCRIPTION Click Details... to go to the Monitor > DHCP Table screen (Section 6.5 on page 47). Use this screen to view current DHCP client information. Click Details... to go to the Monitor > Packet Statistics screen (Section 6.6 on page 48). Use this screen to view port status and packet specific statistics. This displays the NBG4615 port types. The port types are: LAN and WLAN. For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected). Rate For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is disabled. For the LAN ports, this displays the port speed and duplex setting or N/A when the line is disconnected. For the WAN port, it displays the port speed and duplex setting if you're using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is disconnected. For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/ A when the WLAN is disabled. 12.4.0.1 Navigation Panel Use the menu in the navigation panel to configure NBG4615 features in WISP mode. The following screen and table show the features you can configure in Access Point mode. Figure 65 Menu: WISP Mode Refer to Table 31 on page 69 for descriptions of the labels shown in the Navigation panel. NBG4615 User's Guide 93